How To Set Up An Alexa Dot 2nd Generation

This commodity outlines what you lot'll need for Echo Dot 2nd Generation setup. We cover the steps in doing information technology as well as how to test out your speaker after you end setup.

Picture of the Amazon Echo Dot 2nd generation smart speaker, top view. Echo Dot 2nd Generation Setup. — Amazon Repeat Dot 2nd generation smart speaker top view.

What Yous'll Need Earlier Starting Echo Dot 2nd Generation Setup

1. A WiFi Internet Connexion

None of the Echo devices built to date has an Ethernet RJ45 port. So, your just option for Echo Dot 2nd generation setup, is to connect them to the Alexa service via your wireless network. This network must have internet access. Note that Alexa on your Echo device volition not work without a properly configured wireless internet connectedness.

two. An Amazon Account

Go to https://amazon.com/ to set upwardly a new account in that location if you lot practice non already accept 1. Typically, your account user name is your email address.

3. The Alexa App

Finally, the Alexa app is available in the Google Play (Android) shop, also every bit the App Shop (iOS). Download and install the right version on your tablet.

Echo Dot 2nd Generation Setup Process

1. Unpack your Echo Dot 2

Showtime, the Dot comes in a pocket-sized blue box, and the box itself is in a plastic bag. Remove that outer handbag, and slit the tape securing the box superlative airtight with a sharp knife.

Open the box and spread the contents out on a tabular array. Yous should take the Dot, the power adapter, and a micro USB to USB-A cable.

Remove all clear plastic protectors from the Dot from the side and top. This exposes the USB and sound output (headphone) cable ports (side) and volume up-down, mic mute, and wake buttons (pinnacle).

Then, unpack the adapter and cable, which may too be packed in plastic bags. Y'all're at present set to continue with Echo Dot 2nd generation setup.

2. Run the Alexa App

Selection upward your tablet and bring upward the Amazon Alexa app. If this is your outset Echo device, the app prompts you to ready a new device.

3. Check your Amazon Account Credentials to Continue with Repeat Dot 2nd Generation Setup

Thirdly, if yous oasis't yet signed in to your Amazon account with this app, the app prompts for your Amazon account info (user Id and password). If you haven't yet created an Amazon business relationship, visit amazon.com and follow the instructions at that place to fix a new ane.

4. Enter Amazon Business relationship Id and Countersign

In this footstep in Echo Dot 2nd generation setup, should the Alexa app ask, enter your Amazon business relationship details.

This then signs yous in. The app then remembers your account info any time you lot run information technology. That way, y'all won't have to enter this data every time.

5. If the App Does Not Ask You to Prepare Up a New Device…

If this Dot is not your starting time Repeat device, the app displays its Home screen, with a menu on the left side of that screen. In this scenario, we use the iOS version of the Alexa app.

6. Become to the Settings Screen

Do this by tapping the Settings menu particular (left side of screen).

The Settings screen displays.

7. Go to the Set up New Device Screen to Continue with Repeat Dot 2nd Generation Setup

Next in Echo Dot 2nd generation setup, get there by tapping the then-named detail, found on the Settings screen Alexa Devices grouping. That screen gives you a choice of which device (Repeat, Repeat Tap, or Echo Dot) to prepare.

eight. Tap the Echo Device that Matches the One you lot're Setting Up

Yous'll and so see the Choose Language screen.

9. Choose the Language

Use the drop-down bill of fare to choice the language yous'll exist speaking to this device (English language (United States) is selected by default).

Then, press the Continue push button.

The Begin Echo Dot Setup screen appears.

10. Tap the Connect to WiFi Button

A picture of a Dot in setup style with the rotating orange light appears on your tablet screen. At this point, make sure that your Dot is connected to power and that the orange light ring on its outer edge is glowing. The orange light means that the Amazon.XXX network is currently "live."

11. Press the Continue Push button to Continue with Echo Dot 2nd Generation Setup

The Connect your iPad to Repeat Dot screen displays.

Per that screen'southward instructions in this part of Echo Dot 2nd generation setup, get to your WiFi settings page on your tablet and look for the Amazon.XXX WiFi network. It'due south an unsecured (open) network, so yous need no password to connect to it.

Non to worry though, as this network is only active while setting upwardly your Dot. Otherwise, it'due south disabled and non ane employ information technology to hack your Dot.

12. Connect the Power Adapter to your Echo Dot second Generation Speaker

Plug the micro USB terminate of the power cord into the matching port on your Dot. Plug the USB A connector into the matching port on the AC adapter power supply. And so, plug that adapter into a working 120-volt AC outlet.

13. Watch the Echo Dot Power Upward

The low-cal ring showtime turns vivid blue with an aqua (turquoise) blip that circles around the blue low-cal ring.

Picture of the Echo Dot Gen 2 speaker, front view, stock photo. — Echo Dot Gen ii speaker, front view, stock photograph.

After several seconds, the light ring turns orange, and a female vocalisation says, "Hello. Your Amazon Echo Dot is fix for setup. Only follow the instructions in your Alexa app." If this does not happen, you lot may have to reset your Dot. Follow one of these procedures at the post-obit links, for the Gen 1 or Gen ii Dots, depending on which model you have (generation 1 or generation 2).

Picture of the Amazon Echo Dot Gen 2 in Setup Mode, showing Light Ring with orange blip circling. — Amazon Echo Dot Gen two in Setup Mode, showing Light Band with orange blip circumvoluted.

At this bespeak, the Repeat Dot creates its own WiFi network, to which you must connect your tablet to temporarily, to program in the credentials.

14. Connect to the Amazon.Xxx WiFi Network to Continue with Echo Dot 2nd Generation Setup

Back on your tablet, tap the Amazon.Thirty item in the WiFi networks listing. Note that the Amazon.XXX network only appears when your Dot is in setup mode, and your tablet is close enough to the Dot to option it upwards. Again, call back that once you finish setup, this network goes abroad.

Be certain your tablet and Dot are shut plenty for the tablet to come across the Dot's Amazon.XXX WiFi network. Repeat Dot 2nd generation setup doe snot work if you're also far abroad from the speaker. If yous do not see this, motion the Dot closer to the tablet and then, on the tablet, bank check the available WiFi networks list once again.

When you've successfully connected your tablet to this network, your Dot will audio a pleasant tone and say, "Y'all've connected to Echo Dot. Go ahead and finish the setup in your Alexa app." Not only do yous hear this message from the Dot itself, but the Alexa app on your tablet also displays a similar bulletin on the screen.

fifteen. Press the Go along Button back in Alexa App

To choose the WiFi network you dot will ultimately use during normal functioning, tap the Proceed button.

This starts a scan for in-range WiFi networks that your Dot sees.

Then after a few seconds, it displays that listing onscreen.

16. Select the WiFi network to Connect your Echo Dot 2nd Generation To

From that list, tap the wireless network name your dot should use. This network must have internet and exist able to accomplish the Amazon infrastructure servers for your Echo Dot to piece of work correctly.

The Alexa app then prompts yous (if the network has been secured) to enter its countersign.

17. Enter the WiFi Password

Tap in the right password for the network SSID you lot've chosen.

18. Press the Connect Button to Proceed with Echo Dot 2nd Generation Setup

Lastly, after typing in the password, press the connect button on that aforementioned screen. This instructs the Echo Dot to attempt to connect to the WiFi network you've simply specified. This connecting may take several tens of seconds. Only eventually, if you lot've entered the correct password, the Dot successfully connects to your WiFi network.

You lot'll then see the "Preparing your Echo Dot." bulletin and a progress bar begins advancing as information is exchanged with the Amazon infrastructure.

After a short suspension, and if all goes well, you'll run into the "Setup is complete. Your Dot is at present connected to WiFi" bulletin. At this bespeak, the Amazon.Xxx network has been turned off. Then it can no longer be used to admission your Dot. All further access happens via your WiFi network.

Repeat Dot 2nd Generation Setup is Done!

Once you lot finish the Echo Dot 2d generation setup routine, your Dot is prepare to receive and respond to commands and questions once the orangish light ring goes dark. The Alexa app offers to bear witness you an introductory video. Endeavor asking your Dot some questions like:

Alexa, what time is it?
Hey Alexa, what'southward the weather?
Alexa, give me my flash briefing.
Okwy Alexa, tell me a joke.
Alexa, how are you today?
Hey Alexa, sing happy birthday.

… and and then on. Enjoy your Echo device. They're awesome!

References for Repeat Dot 2nd Generation Setup

Amazon Alexa Ofttimes Asked Questions (FAQs)
Alexa Echo Help Pages
Amazon Echo on Wikipedia

Revision History

2019-05-02: Added targeting for 'Repeat Dot 2nd Generation Setup', more tags, and more subheadings. Deleted advertizing code scripts.
2016-12-02: Originally published.

Source: https://tomstek.us/echo-dot-2nd-generation-setup/