How To Set Up Callaway Epic Driver

The Callaway Epic Max, Max LS, and Speed drivers are laden with Bogus Intelligence and the 2022 additions to the Callaway EPIC family of drivers. All three models have the Callaway OptiFit Hosel to adjust loft and lie. The Max and Max LS likewise take an adjustable sliding weight in the sole to influence shot shape.

Moveable weight engineering science

The Epic Speed has the centre of gravity pushed forward, its low spinning and the fastest in ball speed terms in the 2022 Ballsy lineup. Everything is set up for out-of-the-box distance and forgiveness with the Opt-Fit hosel to get dialled in should information technology be required.

Although there is no sliding weight track, there is what appears to exist an adjustable weight at the back of the Epic Speed model. However, it'southward best non to adjust or remove that. It is for custom plumbing fixtures use but.

Callaway EPIC Max driver

The EPIC Max and Max LS (or Low Spin) drivers feature a sliding weight in a rail that runs from the center of the sole to the heel. The weight in the runway is 17-grams in the EPIC Max and 13-grams in the EPCI Max LS.

The weight in the track, when loosened, tin can motion to any position along the rail. You'll notice the rail runs from the centre at the dorsum towards the heel. It doesn't run out towards the toe similar in the EPIC Flash model from 2022.

The factory setting is neutral, with the weight in the center at the back (note, there are no notches or markings in the Max or Max LS), and in this setting, the driver will exist at its well-nigh stable and forgiving.

To open the spiral in your driver, identify the wrench into the top of the screw and turn anti-clockwise and to tighten the screw, y'all plow information technology clockwise. When the screw is fully tightened, there volition be an aural "CLICK" to let y'all know the sleeve is safely locked in place and avert over-tightening.

Sliding the weight towards the heel will accept the effect of promoting a draw or right to left bias on your drives (for right-handed golfers). If you struggle with a fade or want to right a slice, this setting will aid you lot. Lock it in, await for the click, and away yous become.

From here, you can motility the weight back towards the centre to make the draw the bias more than subtle, securing the weight anywhere along the track.

Opti-Fit Hosel

The Opti-Fit hosel on Callaway drivers allows you to adjust loft and prevarication. Before removing the head, expect at the markings on the hosel. In that location volition be a pair of small dashes, one on the head and i on the hosel. When adjusting the Opti-Fit hosel, the Golden Dominion is to have these lined upwardly at all times!

When the shaft screw is fully open up, you tin can easily remove the caput from the shaft. You'll notice the top and bottom cogs can plough independently of each other and indicate some of the unlike loft and lie options you can choose.

You lot tin can add together up to 2-degrees of loft and go ane-degree lower. And so for each loft, you can choose an North for neutral and a D for depict setting.

The key to setting upwards the Opti-Fit hosel is to focus on finding your desired loft first - "S" for stated loft and +1, +2, or -i -degrees.

If you want to hitting the driver a little higher and bring up the spin, you can add 1-degree of loft by lining up +one with the little hyphen. Holding that in identify, you tin now plow the other cog - it'southward like a little jigsaw. You'll see y'all accept two options that fit, Due north for Neutral and D for Draw. Make your option, line up with the hyphen, and reattach the head.

Conversely, if y'all want to flight the ball a little lower and reduce spin, you lot tin can choice the -1 on the cogs. Again, selection Neutral or Depict on the other cog, pop the head dorsum on, brand sure the lines friction match and tighten.

Brand large changes first

If y'all have the option of moveable weight on your Callaway driver, we suggest making these adjustments first as they will have a more significant upshot on your ball flying. Once you're happy, you can and then make further, more subtle changes through hosel adjustment.

And information technology is very of import to remember - y'all tin can arrange your driver on the range or at any fourth dimension before or afterwards your round, only non during information technology!

For more information or to speak to one of our PGA qualified customer services team call 0208 4016 901. Lines and emails are open up and managed from 9:00am - five:00pm , Monday – Friday and 9:00am - i:00pm Sat.

Source: https://www.golfbidder.co.uk/help-and-advice/how-to-guides/20210726/how-to-adjust-your-callaway-epic-speed-or-max-driver.html

Share this post